|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
KF2002-GR40A Printheads Compact medium speed thick film thermal printhead (8dots / mm) KF2002-GR40A The KF2002-GR40A is ideal for applications that require compact, lightweight thermal printheads, such as POS and label printer applications. The 2-, 3-, and 4-inch sizes have a resolution of 203dpi. This series is suitable for a wide range of applications. !Applications POS printers Label printers Receipt printers General purpose compact printers !Features 1) Both ROHM's advanced LSI technology and proprietary partial glaze are used to realize higher printing efficiency. With a high print speed of 100mm/s, this series is also suitable for thermal transfer printing. 2) Besides the fact that harness-type direct connectors at either end allow wring to be fitted as convenient, the thermal printheads can be applied directly to the substrate without a heat sink. Both these features give engineers greater freedom when designing the printer mechanism. 3) One rank resistance value of 800 3% eliminates the inconvenience of rank selection. !External dimensions (Units : mm) 60 (HEATSINK WIDTH) DOT #432 16 15.1 Max. 1.7 5.85 DOT #1 Max 4.0 . 1 54 (EFFECTIVE PRINT WIDTH) 2.6 No.7 No.1 No.7 No.1 CONNECTOR B CONNECTOR A 5 4.6 50 2-M3 1/4 KF2002-GR40A Printheads !Equivalent circuit VH GND 7 1,2 DOT #432 DOT #1 1,2 7 VH GND 3 STB3 STB2 4 5 2 1 5 STB1 4 LATCH REGISTER DI V DD 6 SHIFT REGISTER 3 6 THERMISTOR 30k B3950 CONNECTOR B CONNECTOR A TM 3 LAT CLK Fig.1 !Pin assignments CONNECTOR B No. 1 2 3 4 5 6 7 Circuit GND GND VDD STB3 STB2 DI VH CONNECTOR A No. 1 2 3 4 5 6 7 Circuit VH VH CLK LAT STB1 TM GND 2/4 KF2002-GR40A Printheads !Timing chart tw CLK CLOCK (CLK) t setup DI DATA IN (DI) "High" :BLACK "Low" :WHITE DATA OUT (DO) "High" :BLACK "Low" :WHITE t hold DI td DO t setup LAT LATCH (LAT) "High" :HOLD "Low" :THROUGH t hold LAT tw LAT t setup STB STROBE (STB) tdo DRIVER OUT tdo Fig.2 !Characteristics Parameter Effective printing width Dot pitch Total dot number Average resistance value Applied voltage Applied power Print cycle Pulse width Maximum number of dots energized simultaneously Maximum clock frequency Maximum roller diameter Running life / pulse life Operating temperature Symbol - - - Rave VH PO SLT TON - - - - - Typical 54 0.125 432 800 24.0 0.64 1.25 0.28 144 4 14.0 50/5x10 0~50 7 Unit mm mm dots V W/dot ms ms dots MHz mm km/pulses C 3/4 KF2002-GR40A Printheads !Electrical characteristic curves 0.8 Paper : KF50-HDA (OJI) 0.7 OPTICAL DENSITY 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 1 2 3 4 5 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 ENERGY (mJ/dot) 0.8 SLT : 1.25ms/line 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 1 2 3 4 5 0.6 ENERGY (mJ/dot) 0.5 0.4 0.3 0.2 0.1 0 0 SCANNING LINE TIME (ms/line) ENERGY (mJ/dot) SCANNING LINE TIME (ms/line) Fig.3 Adaptive speed chart Fig.4 Representative density curve Fig.5 Maximum energy curve 180 160 140 RESISTANCE : (k) 120 100 80 60 40 20 0 -20 -10 0 10 20 30 40 50 60 70 TEMPERATURE : (C) Fig.6 Thermistor curve 4/4 |
Price & Availability of KF2002-GR40A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |